The DDF-L droplet nozzle is used wherever intensive lubrication of the tool from two sides is necessary. The nozzle can be kept very small due to the separation from the mixing head. They are particularly suitable for permanent installation e.g. in drilling devices or can be positioned flexibly with magnetic stands. The air and coolant quantities can be set individually for each nozzle on the mixing head via needle valves.

Connection with pneumatic hose:
6 mm outer Ø for air
4 mm outer Ø for coolant

The following is also required for connection as an additional nozzle:
One each
Y-connector for 4 mm hose (PNE.SVY4.4M)
Y-connector for 6 mm hose (PNE.SVY6.6M)

or one each

T-connector for 4 mm hose (PNE.SVT4.4M)
T-connector for 6 mm hose (PNE.SVT6.6M)