Noga Minicool

Low-pressure atomizer for thin oils and liquids with a targeted range of action.

In many manufacturing processes, the atomization of oils as a lubricant and coolant is essential. With Noga-Minicool, the avoidance of operating errors and economical use of the lubricants is guaranteed by automation.

Simple application
The fluid hose is placed in or connected to a pressureless container. Starting at two bar overpressure, the Noga atomizer responds. Via a throttle valve, the ratio of air / liquid quantity can be finely dosed.

Full flexibility
Little effort – high performance: the higher the pressure, the finer the spray. The Noga Mini Cool works with an operating pressure of 2 … 6 bar. With pending compressed air the fluid is atomized immediately.
The atomizer works permanently – but always with well-dosed quantities. In the center of the air jet, the liquid is supplied economically and cleanly.

Technical specifications:
Max. Viscosity: 350 mm² / s
Operating pressure: 2 … 6 bar
The hose lengths for the two air and liquid feeds are each about 2.5 meters.
The length of the flexible nozzle feed is approx. 25 cm.
Connection thread 1/4 inch